Research

This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/ring-spanner-for-oil-drain-plugs?lang=nl>

This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/rip-saw?lang=nl>

This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/reflex-hammer?lang=nl>

Hammer (400-800 gr) used by the slater when covering or repairing a slate roof. It is a composite tool that has a pointed end on one side - which punch holes for the nails in the slates - and on the other side a hammer end that drives the slate nails into the wood. In the middle, between the two ends, there may be a pear-shaped cutout with which nails can be pulled out. Another possibility is that there is a protrusion with a V-shaped cutout at the top. Between the working part and the hammer handle there is - on one or both sides - a sharp side with which the slates are cut to size. This is done with the help of a slater's stake. [MOT]

Riffler rasps and riffler files come in a wide variety of shapes, sizes (approx. 12 to 50 cm) and coarse. Usually both ends of the tool have a curved active part, but there are also models with a handle. The curved shape makes it possible to finish complex profiles and hard to reach corners and curves in wood, stone, plaster and metal. [MOT]

This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/ring-spanner?lang=nl>

This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/rivet-set?lang=nl>

This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/ripping-chisel?lang=nl>

This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/roller-mincer?lang=nl>

This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/roasting-spit?lang=nl>